Wednesday, September 8, 2021

Kitchen Part 1 - Cabinet Frame and a Sink

We started on the kitchen (well a long time ago... but just getting around posting now...)!  Based around a simple 2 burner stove and sink combo.  Propane is mounted external so it just gets piped in and no need for a propane box.  Water storage is a 7 gal under the cabinet, where a pump, fuse box (for the kitchen area, on a feed from the main battery area), and the furnace sit.
Cutting out some holes for the sink and stove.

The left side of the cabinet has some controls and outlets in it - 120VAC is wired from the inverter in the electrical cabinet on the other side.  There is also a pushbutton for turning on propane, the water pump, and another USB outlet for charging stuff.  Buttons are color coded! Red LED for propane, BLUE for water. Oooo neat.

Fitting up stuff before putting it together/in the truck.  Looks... OK?

The sink above is actually under mounted, but fitted it up on top before actually mounting it.  We went with a Kraus KHU101-14... seemed big enough?  Stove is a Ramblewood GC2-37P which left enough room for the furnace underneath.

Building a kitchen in the living room at Christmas was fun... 


Kitchen fit up just fine in the truck once we carried it out - so we brought it back in to stained and finished.  Part 2... installing it for reals... up next.

Cat Tax









No comments:

Post a Comment